Cable Railings

CABLE RAILINGS:

Artistic Railings, Inc. has a long history of fabricating and installing interior and exterior cable railings. Working with Type 316 Stainless Steel cables and hardware our products require little maintenance and provide excellent resistance to atmospheric conditions.

This exterior cable railing is fabricated with Stainless Steel cables that run through aluminum I-beam style posts with 1/4" x 1" mid span tension bars. The frame is fabricated from aircraft grade aluminum & powder coated white. CR-01

This exterior cable railing is fabricated with 3/16" Stainless Steel cables that run through 2" square aluminum posts. The posts are side mounted in place. The frame is fabricated from aircraft grade aluminum & powder coated white. CR-02

This railing is fabricated from 1/8" stainless steel cables, 1-1/2" stainless steel posts and an oak wood top molding finished in a cherry stain. CR-03

This staircase was fabricated from steel including the handrails, post and stair tread mounts. The bottom main posts were tapped to accept 1/8" stainless steel ferrules, while the top posts accepted stainless steel hidden hardware for tensioning. CR-04

This railing was fabricated from 3/16" stainless steel cables that were run through bronze vertical posts which were topped and covered in a rich Mahogany wood. CR-05

This Modern Cable Railing is fabricated with a 2" x 6" stainless steel top, 4" x 6" stainless steel posts and 3/16" stainless steel cable. The posts were mounted over 3" steel post that were welded to the existing steel beams and then filled with grout. Notice the gray grout lines at the base of the posts. CR-06

This modern style cable railing is fabricated from stainless steel post core drilled in to the blue stone slabs. The top molding is a 2" square stainless steel tubing which also serves as a strong back support bar for when sitting on the stone work. The cables are 1/8" stainless steel and set on 3" centerlines. Notice how the cables dissolve in to the back ground. CR-07

This Modern Cable Railing is fabricated with a 1 1/2" by 3" aluminum top molding, 2" square aluminum posts and 3/16" stainless steel cable. The posts were mounted with 4" square plates and secured to the top of a knee wall. The railing over looks the water in the surrounding bay. CR-08

This Stairway Cable Railing is fabricated with a 2" x 3" aluminum top, aluminum I-beam posts and 1/8" stainless steel cables. The posts were mounted to steel stringers and the handrail was mounted to the inside of the I-beam posts. The aluminum frame was powder coated an ANSI gray color. CR-09

This Modern Cable Railing is fabricated with 1 1/2" square stainless steel posts with 5/8" diameter peg tops, wood top molding and 1/8" stainless steel cables. The posts were blind mounted to the floor. The railing was installed around an open staircase to the lower level in 2 story private apartment. CR-10

This vertical cable railing is fabricated with 1-1/2" square aluminum posts, TM-258 aluminum top and 1/8" stainless steel cables. The posts are side mounted to aluminum facia plates and concrete stringers. The aluminum frame was sandblasted and powder coated anodized dark bronze. CR-11

This 1970's period large opening pipe railing was recently updated with modern stainles steel 3/16" diameter cables to close down the infill area of the guards. The railings over look an open floor water feature in the lower lobby of this medical building. CR-12

This residential cable railing is fabricated with a 1-1/2" square steel posts, 3/8" x 1-1/4" flat bar, 1/8" stainless steel cables and a mahogany wood top molding. The posts were mounted to wood flooring with steel plates on the closed walls of the stair stringers. The steel frame was powder coated flat black color with texture. CR-13

This Modern Cable Railing is fabricated with a 1" by 2" aluminum top and bottom bar bar with IPE wood top molding, 2" square aluminum posts and 3/16" stainless steel cables. The posts were mounted with 4" square plates and secured to the paver blocks with fasteners. The railing flanks the main entrance to the clients home. CR-14

This patio cable railing is fabricated with 1" x 2" aluminum top, 1-1/2" square aluminum bottom bar and posts with 1/8" stainless steel cables. The posts were set in the masonry with core drilled holes and grout. The aluminum frames were sandblasted and powder coated with a Darkroast color. CR-15

All Materials Copyright Protected 1997, 2012 Artistic Railings, Inc. Contact Artistic Railings
Garfield, New Jersey
Showroom (973) 772-7121 or Main Office (973) 772-8540